1) When roping down a load on your lorry what
is the best knot to use?
2) You are securing a very heavy load with a
ratchet strap.
What type of anchorage point
should NOT be used?
3) Which type of load would most benefit from
being carried
on a lorry fitted with roadfriendly
suspension?
4) Which of the following would reduce the
'wave effect' when driving tankers?
5) Your vehicle has a maximum authorised
mass (MAM) of 40 tonnes.
The tare weight
is 10 tonnes.
What would your maximum
payload be?
6) You are driving a lorry with an ISO container
on a trailer.
You must make sure that
7) Why is it important to distribute the weight
evenly over the axles when loading a lorry?
8) You are driving a vehicle with an unladen
trailer.
You change into a low gear while
travelling at speed. What could happen?
9) An attendant must accompany you when
your load is wider than
10) You are delivering a load of building
materials on pallets.
Before unloading what
should you ensure FIRST?
1. a |
2. a |
3. c |
4. c |
5. b |
6. b |
7. d |
8. d |
9. d |
10. b |
© Crown copyright material reproduced under licence from the Driver and Vehicle Standards Agency, which does not accept any responsibility for the accuracy of the reproduction
By using our website you accept the terms of our Privacy Policy.